3 Reasons For Oil Seal Failure And Their Solutions

The oil and gas industry is one of the most challenging due to severe conditions and high demands. Some engineered parts, like engine oil pump, oil engine water pumps, and oil seals, have to work in these harsh conditions, where they might be exposed to different extremes. So if you're having an issue with your oil seal, you may be wondering what the solution is. This blog discusses three reasons for oil seal failure and their solutions.

The 3 Common Failure Factors Are Followed By Their Respective Solutions

1. Chemical Attack

Reason: There have been reports of vehicle oil seal failures following chemical attacks. The oil seals are responsible for keeping the engine and transmission running smoothly. In some cases, the oil seals have failed due to exposure to nerve agents or other chemicals. This can cause the engine to stop working and lead to losing control of the car. If you are concerned that your vehicle may have an oil seal failure, contact a mechanic to inspect it.

Solution: One way to prevent out-gassing is to ensure that the parts that need to be sealed are properly lubricated. Another way to prevent out-gassing is to use a quality sealant.

2. Extrusion and Nibbling

Reason: Oil seals are important components of oil-based engines. They help to keep the engine lubricated and protect it from debris and moisture. Oil seals can be susceptible to extrusion and nibbling, which can cause them to fail. Extrusion is when the oil seal bulges outward from the piston or cylinder. Nibbling is when small seal pieces break off and enter the engine oil. Both of these problems can eventually lead to engine failure.

Solution: This can be done through careful design and manufacturing processes, as well as proper use and maintenance of the parts. In addition, periodic inspection for signs of wear or damage will help ensure that your engine system performs optimally.

3. Out-gassing

Reason: One of the main causes of oil seal failure is out-gassing. Out-gassing is caused by liquid or gas escaping from the part that is being sealed. This can happen when the seals are new or when they are damaged. Over time, this can cause the seals to fail.

Solution: One solution is to replace the entire engine. This is usually the best option, but it's not always available or affordable. Another solution is to replace the oil seal. This can be done without replacing the entire engine, but it typically requires a technician.

Conclusion

If you are experiencing oil seal failure, don't hesitate to contact Garima Global. We are the leading oil seal manufacturers in India, and we can help you get the repair or replacement that you need. We have a wide range of products available, so we can provide you with the best solution for your vehicle. As a certified oil seal manufacturer, we offer a warranty on all our products, so you can be sure that you are getting the best possible service. Contact us today to learn more about our services.